1996 Bronco/F-Series Clutch Controls Removal and Installation

July 25, 2021

1996 Bronco/F-Series Workshop Manual

Clutch Controls

REMOVAL AND INSTALLATION

Clutch Hydraulic Line

Removal

1. Note the routing of the clutch slave cylinder to clutch master cylinder tube (7A512) line from clutch master cylinder (7A543) to the clutch slave cylinder.

2. Remove retainer pin from clutch master cylinder holding clutch slave cylinder to clutch master cylinder tube in place.

3. Raise the vehicle and install suitable safety stands.

4. Disconnect clutch slave cylinder to clutch master cylinder tube from external clutch slave cylinder. On vehicles equipped with concentric clutch slave cylinders, remove tube using Clutch Coupling Tool T88T-70522-A.

Installation

1. Follow the removal procedures in reverse order.

2. Bleed system. Refer to appropriate clutch hydraulic system bleeding procedure in the Adjustments portion of this section.

Hydraulic Clutch Control System, 4.9L, 5.0L and 5.8L Gasoline Engines with Mazda R2 and S5-47 ZF Light-Duty and 7.3L and 7.5L S5-47 ZF Heavy-Duty Transmissions. Download File PDF