1996 Jeep Truck Grand Cherokee 4WD V8-318 5.2L VIN Y MFI
Drive Belt
Service and Repair
REMOVAL
1. Attach a socket/wrench to pulley mounting bolt of automatic tensioner.
2. Rotate tensioner assembly clockwise (as viewed from front) until tension has been relieved from belt.
3. Remove belt from idler pulley first.
4. Remove belt from vehicle.
INSTALLATION
1. Position drive belt over all pulleys except idler pulley. This pulley is located between generator and A/C compressor.
2. Attach a socket/wrench to pulley mounting bolt of automatic tensioner.
3. Rotate socket/wrench clockwise. Place belt over idler pulley. Let tensioner rotate back-into place. Remove wrench. Be sure belt is properly seated on all pulleys.
4. Check belt indexing marks. Refer to drive belt tensioner. Download File PDF
0 Comments