Ticker

6/recent/ticker-posts

2003 Jeep Truck Liberty 2WD Rear Lamp Bulb Replacement

2003 Jeep Truck Liberty 2WD L4-2.4L VIN 1

Rear Lamp Bulb Replacement

REMOVAL

The rear lamp unit may contain up to four bulbs, depending upon the market for which the vehicle was manufactured. The service procedures for each bulb is the same, only the bulb sizes and types may differ. Be certain any removed bulb is replaced with the same bulb size and type that was removed.

1. Disconnect and isolate the battery negative cable.

2. Remove the rear lamp unit from the end of the quarter panel. (Refer to LAMPS/ LIGHTING - EXTERIOR/REAR LAMP UNIT - REMOVAL).

3. Firmly grasp the socket on the socket plate at the back of the rear lamp unit housing for the bulb that is being removed (Fig. 59).

4. Rotate the socket on the socket plate at the back of the rear lamp unit housing counterclockwise about 30 degrees. Download File PDF

Post a Comment

0 Comments