1994 Chevrolet Corvette 5.7L SFI OHV 8cyl
GM Corvette 1984-1996 Repair Guide
Window Regulator and Motor
REMOVAL & INSTALLATION
See Figure 1
1. Remove the door trim panel and water deflector.
2. Remove the window, as outlined earlier in this section.
3. Lower the window regulator about 3 / 4 of the way down. Matchmark the location of the upper regulator mounting bolts, then remove the bolts.
4. Detach the window regulator motor electrical connector.
5. Remove the window regulator from the door by rotating the assembly counterclockwise, then tilt the upper rear surface out from the door, rotate clockwise and lift the regulator assembly out.
Fig. Fig. 1: Window regulator and motor mounting-1996 shown, others similar
To install:
6. Position the regulator assembly in the door.
7. Start threading the upper and lower regulator mounting bolts, align the upper bolts with the matchmark made during removal, then tighten the bolts to 84 inch lbs. (9.5 Nm).
8. Attach the regulator motor electrical connector. ... Download File PDF
0 Comments