1999 Honda Accord DX Wiper/Washer Systems
Accord
1. Disable air bag system. See AIR BAG RESTRAINT SYSTEMS article. Turn ignition off. Remove instrument panel lower left cover. Remove left knee bolster. Remove underdash fuse/relay box, located near left kick panel.
2. Remove driver's multiplex control unit from underdash fuse/relay box. Ensure connector and socket terminals are okay. Repair as necessary and retest system. If connector and terminals are okay, use a DVOM to perform control unit input test. See Fig. 9 . If an input test indicates a problem, find and correct cause and retest system. If all input test results are okay, replace faulty multiplex control unit.
WIPER/WASHER SWITCH
Removal & Installation
Disable air bag system. See AIR BAG RESTRAINT SYSTEMS article. Disconnect negative battery cable. Remove dash lower trim cover and knee bolster. Remove steering column covers. Disconnect wiper/washer switch connectors. Remove 2 screws and wiper/washer switch. To install, reverse removal procedure. Download File PDF
0 Comments