2000 Chevrolet Blazer
BLOWER MOTOR RESISTOR
Removal Procedure (C42)
1. Disconnect the electrical connector (3).
2. Remove the blower motor resistor mounting screws (1).
3. Remove the blower motor resistor (2) from the blower case.
Fig. 3: Identifying Blower Motor Resistor Assembly (C42)
Installation Procedure (C42)
1. Install the blower motor resistor (2) to the blower case.
2. Install the blower motor resistor mounting screws (1).
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Connect the electrical connector (3). Download File PDF
0 Comments