2002 ODYSSEY - Power Window Multiplex Control Unit Input Test
1. Before testing the power window control functions, troubleshoot the multiplex control system.
Driver's Multiplex Control Unit
2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, go to step 4.
4. With the driver's multiplex control unit still disconnected, make these input tests at the fuse/relay box socket.
If any test indicates a problem, find and correct the cause, then recheck the system.
If all the input tests prove OK, go to step 5.
5. Reconnect the driver's multiplex control unit to the fuse/relay box, turn the ignition switch ON (II), and perform the following input tests at the appropriate connectors on the back of the fuse/relay box.
If any test indicates a problem, find and correct the cause, then recheck the system.
If all the input tests prove OK, go to step 6.
Passenger's Multiplex Control Unit Download File PDF
0 Comments