2003 Chrysler Truck PT Cruiser L4-2.4L VIN B
Instrument Panel Assembly Replacement
INSTRUMENT PANEL ASSEMBLY
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable (Fig 14).
3. Remove the instrument panel top cover (Fig. 15).
a. Using a trim stick (special tool C-4755) or equivalent, gently pry off the left and right A-pillar trim. Refer to: "Body and Frame : Interior Trim : Service and Repair" See: Trim Panel\Service and Repair
b. Using a trim stick or equivalent, gently pry out the front power window switch from the instrument panel center bezel. Disconnect the harness connector and remove.
c. Remove the one center bezel retaining screw.
d. Pull off the HVAC control knobs.
e. Using a trim stick or equivalent, gently pry off the center bezel and remove.
f. Remove the two top cover retaining screws.
g. Gently pull rearward on the top cover and unlatch it from the instrument panel and remove.
4. Remove two screws retaining HVAC control.
5. Pull the HVAC control out of instrument panel, disconnect the one wiring connector, the one vacuum harness connector, and disconnect the two control cables. Remove HVAC control from vehicle. Download File PDF
0 Comments