2006 Honda Accord Center Console Removal & Installation

2006 ACCORD - Center Console Removal/Installation

Special Tools Required

􀁺 KTC trim tool set SOJATP2014*

NOTE:

􀁺 Take care not to scratch the front seat, dashboard, and related parts.

􀁺 Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. M/T model: Remove the shift knob (A).

-1 Lower the shift lever boot (B) to release the hooks (C) from the knob.

2. Detach the clips (A, B) by pulling the center console front panel (C) up. If equipped, disconnect the seat heater switch connectors (D).

3. Pry up on the right of the console pocket (A) with a trim tool, and detach the clips, then remove the pocket.

4. Remove the screws (A), detach the clips (B) and hook (C) by pulling the center holder (D) up, and disconnect the front accessory power socket connector (E).

5. Detach the clips (A, B) by pulling the center console rear panel (C) up.

6. Remove the center console (A).

-1 Open the console box lid (B) then remove the console mat (C).

-2 If equipped, disconnect the rear accessory power socket connector (D), and detach the clip (E). Download File PDF