2005 – 2007 PATHFINDER; MIL “ON” WITH DTC P0442 / P0448 / P0455 / P0456 / P1446
APPLIED VEHICLES: 2005 – 2007 Pathfinder (R51)
IF YOU CONFIRM:
A MIL “ON” with one or more of the following DTC(s) stored: P0442 / P0448 / P0455 / P0456 / P1446 AND EVAP Vent Control S/V is stuck open or will not seal when operated/closed.
ACTIONS:
1. Replace the EVAP Vent Control S/V.
2. Install the Filter Kit (refer to the Service Procedure in this bulletin).
3. Clear any DTCs stored in the ECM.
SERVICE PROCEDURE
Replace Vent Control Valve
1. Replace the EVAP Vent Control S/V.
Install Filter Kit
1. Remove the spare tire.
2. Remove the EVAP canister mounting bolt (see Figure 1).
3. Disconnect the vent hose (see Figure 1).
4. Reach above the EVAP canister and disconnect the vent hose at the vent control valve and remove the hose (see Figure 2). Download File PDF
0 Comments