2002 Lincoln LS Workshop Manual
Cooling System Draining, Filling and Bleeding
Draining
1. Release the pressure in the cooling system by slowly turning the pressure relief cap one half turn counterclockwise. When the pressure is released, remove the pressure relief cap.
2. NOTE: Less than 80% of coolant can be recovered with the engine in the vehicle. Dirty, rusty or contaminated coolant requires replacement.
Place a suitable container below the radiator draincock. If equipped, disconnect the coolant return hose at the oil cooler.
- Close the radiator draincock when finished.
Filling and Bleeding With RADKITPLUS
1. Using the special tool, install the RADKITPLUS and follow the RADKITPLUS manufacturer's instructions to fill and bleed the cooling system.
Filling and Bleeding Without RADKITPLUS
When adding engine coolant, use a 50/50 mixture of engine coolant and clean, drinkable water.
To maintain the integrity of the coolant and the cooling system: ...
On 3.9L engines
1. Remove the engine fill cap.
On 3.0L engines Download File PDF
0 Comments