If you're not used to removing trim panels from a car, like a Geo, taking off the door panel might look complicated. But if you have some basic tools and a little time it is definitely a job you can do. With the door panel removed, you can change a speaker or put a window back on track, and maybe save some money along the way.
Step 1 - Roll down the window on the door you'll be working on.
Step 2 - Insert the edge of a panel tool behind the edge of the sail panel at the front upper edge of the door and pry the panel off.
Step 3 - Pry out two small plastic round screw covers in the the door handle. Unscrew the screws located underneath the covers with a Phillips screwdriver.
Step 4 - Unscrew the Phillips screw located in the trim surrounding the door release handle.
Step 5 - Insert a screwdriver blade behind the window crank and pry out the C-clip that holds the crank on. Remove the crank handle.
Pry around the sides and bottom edge of the door panel with a panel tool. When the panel is loose, lift it straight up and off the door.
THINGS YOU'LL NEED: Panel tool, Phillips screw, Flat-bladed screwdriver
0 Comments